Our On-line Measureing Assistant is designed to assist you with our custom slipcover measurement forms. Refer to the measuring assistant as you go through the steps in the measurement form. DO NOT USE THE MEASUREMENT ASSISTANT AS YOUR MEASUREMENT FORM. IF YOU NEED MEASUREMENT FORMS - Measurement Forms

 1 - 2a

1. Chair height. Measure along the side of the chair. Follow the curve of the back to the seat, then measure straight down to the floor. 1a. Round / Scalloped back chairs only - Measure from the top to floor. If the chair back slants, follow the slant.

2. Follow the same path as #1, measure to the top of the seat. 2a. Measure from the top of the seat to the floor. NOTE: #2 plus #2a should equal #1.

3, 5 & 8

3. Placing the tape at the top of seat in the front corner, measure from the top of seat to the floor.

5. Measure from the front of the seat to the back edge of the chair.

8. Measure the thickness of the back. Take this measurement where the back and seat meet.

8a. Scroll back parson's chairs only. Measure across the roll, from left to right and top to bottom.

4 & 7

4. At seat height, place the tape at the outside edge of the chair back and measure across the back.

7. At the top of the back, place the tape at the outside edge of the chair back and measure across the back.

 6 

Measure across the front of the seat at the widest point.Do not measure over the top of the chair.